Silica medical surveillance is the program of medical exams an employer must offer to workers exposed to respirable crystalline silica. Under OSHA, general industry and maritime employers offer it to workers exposed at or above the action level of 25 µg/m³ for 30 or more days a year (29 CFR 1910.1053(i)(1)), and construction employers to workers who must use a respirator under the standard for 30 or more days a year (29 CFR 1926.1153(h)(1)). In both, the exams are free to the worker, start with a baseline within 30 days of initial assignment (unless a qualifying exam was done in the last three years), and are repeated at least every three years.

This guide covers federal OSHA. State Plans may have different or more stringent requirements, mines have their own silica rules set by the Mine Safety and Health Administration (MSHA), and Great Britain and Australia set their own rules (see below). For the general method behind any program, see medical surveillance by exposure group.

Why silica surveillance runs for decades

According to NIOSH, too much respirable crystalline silica can cause silicosis, and also lung cancer, chronic obstructive pulmonary disease (COPD), certain autoimmune diseases and chronic renal failure. Workers exposed to silica, and those with silicosis, are also at higher risk of tuberculosis.

The timeline is what makes silica a records problem as much as a medical one. NIOSH describes chronic silicosis as appearing after 10 or more years of exposure to lower levels, and accelerated silicosis, after high levels of exposure, typically after 5 to 10 years. By the time disease shows, the worker may have changed site, employer or country. The exposure history and the earlier exams have to be findable then, which is why record retention matters as much as the exam itself.

Who must be offered silica medical surveillance

OSHA has two silica standards with the same exam but different triggers:

General industry and maritime (1910.1053) Construction (1926.1153)
Who is enrolled Workers exposed at or above the action level (25 µg/m³, 8-hour average) for 30 or more days a year Workers required by the standard to use a respirator for 30 or more days a year
Permissible exposure limit 50 µg/m³, 8-hour average 50 µg/m³, 8-hour average, for tasks outside Table 1 or where Table 1 controls are not fully implemented
Who examines A physician or other licensed health care professional (PLHCP) A PLHCP
Baseline exam Within 30 days of initial assignment, unless a qualifying exam was done in the last three years Same
Periodic exam At least every three years, or more often if the PLHCP recommends Same
Records Kept under 29 CFR 1910.1020 Same

Sources: 1910.1053(b), (c), (i), (k)(3) and 1926.1153(b), (d)(1), (h), (j)(3).

In general industry, the roster comes from the exposure assessment (monitoring or objective data): who will be at or above 25 µg/m³, and on how many days. The standard does not apply where the employer has objective data showing exposure will stay below 25 µg/m³ under any foreseeable conditions, and it excludes construction, agriculture and the processing of sorptive clays. It also does not apply where the employer follows the construction standard for a task that is indistinguishable from a Table 1 construction task and will not be performed regularly in the same environment and conditions (1910.1053(a)).

In construction, the roster comes from respirator days. A respirator is required where Table 1 of the standard specifies one for a task. For tasks outside Table 1, or where Table 1 controls are not fully implemented, it is required where exposures exceed the permissible exposure limit while controls are installed, where controls are not feasible, or where feasible controls are not enough (1926.1153(e)(1)). So the people who plan tasks need to know which ones put a worker in a respirator, and someone has to count the days.

Both rules are long in force. Construction obligations, including medical surveillance, started on June 23, 2017 (1926.1153(k)(2)). In general industry, medical surveillance started on June 23, 2018 for workers above the permissible exposure limit for 30 or more days a year, and on June 23, 2020 for workers at or above the action level for 30 or more days a year (1910.1053(l)(4)).

What the exam includes

The baseline exam is the same under both standards (1910.1053(i)(2), 1926.1153(h)(2)):

  1. A medical and work history: past, present and anticipated exposure to silica, dust and other agents affecting the respiratory system, any history of respiratory problems or symptoms, history of tuberculosis, and smoking.
  2. A physical exam with special emphasis on the respiratory system.
  3. A chest X-ray, classified under the ILO international classification of radiographs of pneumoconioses by a NIOSH-certified B Reader.
  4. A lung function test (FVC, FEV1 and the FEV1/FVC ratio), run by a spirometry technician with a current certificate from a NIOSH-approved course.
  5. A test for latent tuberculosis infection.
  6. Any other test the PLHCP considers appropriate.

The periodic exam repeats everything except the tuberculosis test, at least every three years or more often if the PLHCP recommends. Comparing each lung function result with the worker’s earlier ones is a form of spirometry surveillance, and it only works if the earlier results travel with the worker.

OSHA’s Appendix B gives clinical guidance for the provider. It is informational only, but it notes, citing the American Thoracic Society (1997), that a silicosis diagnosis or 25 years or more of silica exposure are indications for annual tuberculosis testing.

Two credentials are written into the rule: the B Reader for the X-ray and the NIOSH course certificate for the spirometry technician. When several clinics or contracted providers examine workers, check both before the first exam.

What the provider needs from the employer

The employer must give the examining provider a copy of the standard and (1910.1053(i)(4), 1926.1153(h)(4)):

  • the worker’s former, current and anticipated duties as they relate to silica exposure;
  • the worker’s former, current and anticipated exposure levels;
  • the protective equipment used or to be used, including when and for how long;
  • information from earlier employment-related medical exams that the employer holds.

This pack is where multi-site programs often fall short: exposure data sits with industrial hygiene, task plans with operations, and earlier exams with a previous clinic. In practice it means linking the employee exposure record to the worker before the appointment.

What the worker and the employer receive

Each exam produces two documents for two audiences (1910.1053(i)(5), (i)(6), 1926.1153(h)(5), (h)(6)).

The worker’s written medical report, within 30 days of the exam, with an explanation of the results. It covers the results, any condition that raises the worker’s risk from silica or needs further evaluation or treatment, any recommended limits on respirator use or on silica exposure, and a statement on specialist referral where the X-ray is classified 1/0 or higher or the PLHCP considers a referral appropriate.

The employer’s written medical opinion, also within 30 days, which may contain only:

  • the date of the exam;
  • a statement that the exam met the standard’s requirements;
  • any recommended limits on respirator use.

Only with the worker’s written authorization can the opinion also include recommended limits on silica exposure or the specialist referral statement. The worker receives a copy of the opinion within 30 days of the exam.

So the employer receives only a short, limited opinion, while the full results go to the worker. That split is the same one behind fitness-to-work decisions. In MyC, the outcome, such as fitness-to-work, is shared with HR, HSE and managers, while the medical basis stays confidential.

Specialist referrals

If the PLHCP’s written opinion says the worker should see a specialist, the employer must make that exam available within 30 days of receiving the opinion (1910.1053(i)(7), 1926.1153(h)(7)). The specialist must be an American Board Certified Specialist in Pulmonary Disease or in Occupational Medicine, receives the same information pack, and issues a report to the worker and a limited opinion to the employer, each within 30 days.

The employer’s 30-day clock starts when it receives a written opinion saying the worker should see a specialist, and that statement appears in the opinion only with the worker’s written authorization. Plan for a clock that starts only when such an opinion arrives, and explain the authorization to workers before the exam, so each worker can decide whether the opinion may include a referral recommendation.

Records: what to keep and for how long

For each worker under surveillance, the employer keeps an accurate record with the worker’s name, copies of the PLHCPs’ and specialists’ written opinions, and a copy of the information given to them (1910.1053(k)(3), 1926.1153(j)(3)). Both standards refer to 29 CFR 1910.1020, under which each employee medical record is kept for at least the duration of employment plus 30 years, with limited exceptions, and exposure records for at least 30 years.

Thirty years after employment ends is longer than most software contracts, clinic relationships and site ownership. For how access and transfers work, see OSHA rules for employee medical records.

Running silica surveillance across many sites

At sites under federal OSHA the rules are the same. State Plan states must be at least as effective as OSHA and may have different or more stringent requirements. Either way, what breaks is the coordination. A working checklist:

  • Two rosters. Build the general industry roster from monitoring results and exposure days, and the construction roster from respirator days. A cement plant with its own construction crews may need both. A general industry task that is indistinguishable from a Table 1 construction task, and not done regularly in the same conditions, can be handled under the construction standard instead (1910.1053(a)(3)), which puts those workers on the construction roster.
  • One clock per worker. Each worker has a 30-day baseline deadline from initial assignment and a three-year periodic due date, or a shorter one set by the PLHCP.
  • Prior exams. A qualifying exam in the last three years can replace the baseline, so new hires, transfers and contractors need their earlier exam on file, not just a date.
  • Provider credentials. Keep the B Reader and spirometry certificates on file for each clinic or contracted provider.
  • Two documents. Store the worker’s report and the employer’s opinion separately, with access to match.
  • Specialist clock. Track the 30 days from receipt of an authorized opinion that recommends a referral.
  • Retention. Plan for employment plus 30 years, across site sales and provider changes.

In MyC’s health surveillance software, checks are scheduled from each worker’s exposures, with reminders for upcoming exams, and exposure groups apply specific test and questionnaire templates. Connected lung function devices send results straight into the worker’s record, so they can be compared with earlier results to spot changes. Contractors and employees use the same health record system, and their health surveillance history follows them between sites. See how it works in mining and manufacturing.

Mining: MSHA rules are in flux

Mines have their own silica rules, set by MSHA. Its 2024 final rule set a permissible exposure limit of 50 µg/m³ and an action level of 25 µg/m³ for all miners, and added medical surveillance for metal and nonmetal mines, modeled on the existing requirements for coal mines.

Its compliance dates were April 14, 2025 for coal mines and April 8, 2026 for metal and nonmetal mines. According to MSHA, the Eighth Circuit stayed those deadlines on April 11, 2025, and MSHA continues to enforce the coal and metal and nonmetal standards in place before the 2024 rule, as its Program Information Bulletin P26-01 of April 9, 2026 confirms. On November 12, 2026, MSHA published a proposed rule that would, among other changes, update the medical surveillance requirements to include risk-based criteria. A virtual public hearing begins on December 15, 2026, and comments close on January 11, 2027. Mine operators should follow that rulemaking before changing their programs.

Great Britain and Australia

Great Britain. Silica falls under the Control of Substances Hazardous to Health Regulations (COSHH), with a workplace exposure limit of 0.1 mg/m³ as an 8-hour average (EH40). HSE’s guidance G404 says health surveillance must be provided where workers are regularly exposed and silicosis may reasonably develop. It recommends a baseline before exposure, or as soon as possible after (for example, within six weeks), and an appropriate questionnaire, lung function testing and chest X-rays, at a frequency an occupational health professional advises. The health record is kept for at least 40 years from the last entry.

Australia. In Western Australia, health monitoring for silica is set by Schedule 14 of the Work Health and Safety (General) Regulations 2022. WorkSafe explains that since legislation passed in 2021, a low-dose high-resolution CT scan of the chest has replaced the chest X-ray as the radiological screening test for silica. Health monitoring is supervised by a registered medical practitioner, and the CT scan is repeated every 2 to 5 years depending on the worker’s category.

The same silica exposure can therefore call for a B Reader X-ray at least every three years at a US plant under federal OSHA, an occupational health professional’s schedule in Scotland, and a low-dose CT in Perth. A multi-country program needs one record per worker with test templates per jurisdiction. MyC sets global templates for consultations, tests and questionnaires, with options for local adaptation, and keeps exams and results in one record per worker. To see it with your own exposure groups, book a demo.

Questions

Who needs silica medical surveillance under OSHA?

In general industry and maritime, workers exposed at or above the action level of 25 µg/m³ (8-hour average) for 30 or more days a year. In construction, workers required by the standard to use a respirator for 30 or more days a year.

How often are silica medical exams required?

A baseline within 30 days of initial assignment, unless a qualifying exam was done in the last three years, then at least every three years, or more often if the examining provider recommends.

What does the employer see from a silica exam?

A written opinion with the exam date, a statement that the exam met the standard and any limits on respirator use. Limits on silica exposure and a specialist referral appear only if the worker gives written authorization. The full results go to the worker.

Does an exam from a previous employer count?

It can. The baseline is not required if the worker had an exam meeting the standard’s requirements in the last three years, so the employer needs that exam’s information on file.

How long are silica medical records kept?

Under 29 CFR 1910.1020, for at least the duration of employment plus 30 years, with limited exceptions. Exposure records are kept for at least 30 years.

Sources

  1. 29 CFR 1910.1053: Respirable crystalline silica, general industry and maritime (OSHA)
  2. 29 CFR 1926.1153: Respirable crystalline silica, construction (OSHA)
  3. 1910.1053 Appendix B: Medical surveillance guidelines (OSHA)
  4. 29 CFR 1910.1020: Access to employee exposure and medical records (OSHA)
  5. Medical Screening and Surveillance: Standards (OSHA)
  6. Health effects of exposure to respirable crystalline silica (NIOSH)
  7. Silica updates (MSHA)
  8. 2026 notice of proposed rulemaking: respirable crystalline silica and respiratory protection (MSHA)
  9. Lowering miners' exposure to respirable crystalline silica: 2024 final rule (MSHA)
  10. G404: Health surveillance for those exposed to respirable crystalline silica (HSE)
  11. EH40/2005 Workplace exposure limits (HSE)
  12. Health monitoring: silica, respirable crystalline (WorkSafe Western Australia)

Written by Lisa Bardet, VP Marketing at MyC. Every factual claim in this article is checked against primary sources, such as regulations, regulators and peer-reviewed studies, in three passes before publication, and the sources are listed above.

This article is general information for employers and occupational health teams. It is not legal or medical advice for a specific situation.